NavList:
A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding
Re: Bygrave
From: Hanno Ix
Date: 2011 Apr 11, 09:14 -0700
From: Wolfgang Hasper <wolfgang.hasper@web.de>
To: NavList@fer3.com
Sent: Sun, April 10, 2011 12:25:16 PM
Subject: [NavList] Re: Bygrave
Hi Hanno,
here's my set of drawings in its current version.
Use a drwing file viewer to view the .dxf or install a
free drawing software such as Qcad or the like.
I also have a file with the texts (manual and
calculation scheme)
The scales were made by Robin Stuart.
I am currently trying to get familiar with basic
postscript, maybe I can supply a file to create scales
to bespoke dimensions some day...
I also have some of the tubes left.
Wolfgang
Am Sonntag, 10. April 2011 01:50 schrieb Greg
Rudzinski:
> Hanno,
>
> You will need to contact Wolfgang Hasper and see if
> he is finished with his project . There is a set of
> photos he took showing scales.
>
> Greg Rudzinski
> ----------------------------------------------------
>------------ NavList message boards and member
> settings: www.fer3.com/NavList Members may
> optionally receive posts by email. To cancel email
> delivery, send a message to NoMail[at]fer3.com
> ----------------------------------------------------
>------------
From: Hanno Ix
Date: 2011 Apr 11, 09:14 -0700
Wolfgang:
Gruess Gott!
I am interested in those tubes, yes!
And thank you for the drawings - however, I don't know
what program to use for those. Please let me know.
May I ask: How are you going to adjust the scales to fit
the tubes exactly, ect.?
While I do have a plan for this I would like to ask you for
your advice.
Thank you
From: Wolfgang Hasper <wolfgang.hasper@web.de>
To: NavList@fer3.com
Sent: Sun, April 10, 2011 12:25:16 PM
Subject: [NavList] Re: Bygrave
Hi Hanno,
here's my set of drawings in its current version.
Use a drwing file viewer to view the .dxf or install a
free drawing software such as Qcad or the like.
I also have a file with the texts (manual and
calculation scheme)
The scales were made by Robin Stuart.
I am currently trying to get familiar with basic
postscript, maybe I can supply a file to create scales
to bespoke dimensions some day...
I also have some of the tubes left.
Wolfgang
Am Sonntag, 10. April 2011 01:50 schrieb Greg
Rudzinski:
> Hanno,
>
> You will need to contact Wolfgang Hasper and see if
> he is finished with his project . There is a set of
> photos he took showing scales.
>
> Greg Rudzinski
> ----------------------------------------------------
>------------ NavList message boards and member
> settings: www.fer3.com/NavList Members may
> optionally receive posts by email. To cancel email
> delivery, send a message to NoMail[at]fer3.com
> ----------------------------------------------------
>------------
