NavList:
A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding
Re: latitude and longitude with Yeoman Chart Plotter
From: Brian Whatcott
Date: 2002 Jul 12, 06:43 -0500
From: Brian Whatcott
Date: 2002 Jul 12, 06:43 -0500
At 05:48 AM 7/12/02, you wrote: >Hello > >I have the following problem: >I cannot referencing the chart. > >If I enter three positions with latitude and longitude I get reference error. >But if I reference a chart with two points then it works > >Anybody can help me >Best Regards >Arne Here's a wild guess: two points have a completely determined line to draw between them. Three points provide an uncertain input for a line of position: there are three linesany of which could represent the start point and the end point - so the plotter rejects them?? Brian Whatcott Altus OK Eureka!