NavList:
A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding
Re: Obtaining Azimuths. was: Re: Burdwood's Tables
From: Gary LaPook
Date: 2007 Oct 15, 09:53 -0700
From: Gary LaPook
Date: 2007 Oct 15, 09:53 -0700
Gary LaPook writes: The Burdwood table looks just like H.O. 214 minus the altitudes. (Or H.O. 249 at a lower precision.) I am wondering how usefull Burdwood would be at this late date since these other tables are now available. Rust's diagram has the advantage of needing only two pages and can be used with any of the trig table methods of compurting altitudes. gl On Oct 14, 6:21 am, John Colewrote: > While looking over my two pages of mind numbing manual interpolation I > found an error in the last step and decided to organize the process on > an Excel sheet. This led to Az of 285.16 for Example 1 and 284.65 for > Example 2, Close to George's results of 285.1 and 284.7 respectively. > > John Cole > > On Oct 11, 9:24 pm, John Cole wrote: > > > There are no warnings in H.O. 171 about errors or instructions as to > > interpolation. There is a single worked example given from which one > > deduces that interpolation has been used however the resulting azimuth > > was given to the nearest whole degree only. > > > I worked George's examples two ways. First a quick and dirty run > > through rounding the LHA to 3 hr 38 min the Dec to 55 deg 30 min and > > the Alt to 61 deg 30 min and interpolating for LHA in the table. The > > answer was Az 285 to the nearest whole degree. > > > The second time through I did not round anything but interpolated > > carefully throughout including the last step for Az. Unfortunately > > after all that work I got the same answer for both examples, namely > > 285.0 > > > John Cole > > > On Oct 11, 5:16 am, "George Huxtable" > > wrote: > > > > I have altered the threadname because we are now comparing various sources > > > for obtaining azimuths. > > > > Thanks to John Cole for his late recantation about message-sizes, and for > > > providing- > > > > | Another historic table for finding azimuths is found in H.O. No. 171 "Line > > > | of > > > | Position Tables (for working sight of heavenly body for line of position > > > by > > > | the cosine-haversine formula, Marcq Saint Hilaire Method)" US Navy Bureau > > > | of > > > | Navigation 1915. Table V the Finding of the Azimuths, page attached. > > > | > > > | The table is entered with the dec (across the column headings) and hour > > > | angle (in hr and min, down the column) to find a tabulated number. Then > > > the > > > | tabulated number is located again in the dec column whose heading is > > > closest > > > | to Hc and the Az is read off in the hour angle column and its direction > > > | determined by the usual rules. > > > | > > > | The rest of the tables in HO 171 are altitude corrections and log sines, > > > log > > > | cosines, and log and nat haversines. > > > > ========================= > > > > That table is the same, in principle, as the one provided by Bennett. They > > > are both tabulations of a number which corresponds to cos X sin Y, where X > > > corresponds to the column heading, and Y the row heading. Bennett writes the > > > result as a 3-figure digit, the nearest that corresponds to 1000 cos X sinY. > > > In HO 171, it's tabulated instead as log( cos X sin Y), to 5 decimal places, > > > which uses more space. [Note that those are "navigator's logs", to which 10 > > > has been added to turn negative numbers into positive ones, not exactly the > > > logs you will find in school log-tables or on a calculator.] > > > > Both tables use the formula sin Az = sin LHA cos Dec / cos Alt. > > > > We can rewrite that as cos Alt sin Az = cos Dec sin LHA. > > > Conveniently, both sides of this expression have the same form. > > > > So first find a number (or perhaps its log) that corresponds to cos Dec Sin > > > LHA. Then look for that same number (or same log) in the Alt column, and it > > > will be in the row that corresponds to Az. > > > > Rounding errors in HO171 will in general be somewhat less than Bennett's > > > because the columns are at half-degree rather than whole-degree intervals, > > > though the rows are the same, and because there's no rounding (to speak of) > > > of the tabulated number. > > > > It would be of some interest to me if John Cole would kindly extract > > > azimuths from HO171 for the contrived extreme examples I used when testing > > > Bennett's tables, as follows- > > > > Example 1. Dec 55d 31'N, LHA 54d 29', alt 61d 29'. The true result for > > > Azimuth should be 285.1 degrees. > > > > Example 2. Dec 55d 29'N, LHA 54d 31', alt 61 d31'. The true result should be > > > 284.7 degrees. > > > > Even if HO171 values for those examples are less erroneous, it's likely that > > > at other combinations, some significant errors may occur. I wonder if it > > > carries any warnings about where it should not be relied on. I wonder, also, > > > whether any advice is given about interpolating between whole-number values. > > > > George. > > > > contact George Huxtable at geo...@huxtable.u-net.com > > > or at +44 1865 820222 (from UK, 01865 820222) > > > or at 1 Sandy Lane, Southmoor, Abingdon, Oxon OX13 5HX, UK. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "NavList" group. To post to this group, send email to NavList@fer3.com To from this group, send email to NavList-@fer3.com For more options, visit this group at http://groups.google.com/group/NavList?hl=en -~----------~----~----~----~------~----~------~--~---