NavList:
A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding
Re: Set and drift
From: Gary LaPook
Date: 2006 May 19, 17:27 -0500
From: Gary LaPook
Date: 2006 May 19, 17:27 -0500
From Gary LaPook:
It is easier to use a E-6B aviation computer (a circular slide rule with a vector diagram plotting device on the back) which makes it easy to draw the necessary vector diagram on it and only costs about $15 at every pilot shop.
Bill Burchell wrote:
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to NavList@fer3.com
To , send email to NavList-@fer3.com
-~----------~----~----~----~------~----~------~--~---
It is easier to use a E-6B aviation computer (a circular slide rule with a vector diagram plotting device on the back) which makes it easy to draw the necessary vector diagram on it and only costs about $15 at every pilot shop.
Bill Burchell wrote:
Robert wrote:I calculate the course made good by actually plotting a vector on my chart or plotting sheet. I use the latitude scale to represent the drift and the compass rose for the set. Does anyone do it mathematically in practice?I do play with it mathematically using the law of sines and cosines rather than the 4 sets of formulas set forth in texts. In practice I generally use a plotting sheet, and may transfer the results to a chart. Less wear and tear on the chart. The math is much harder on board than it is on the dining room table, and is always sanity checked against a sketch anyway. The affect of a blunder is pretty harmless at the dining room table ;-) Bill
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to NavList@fer3.com
To , send email to NavList-@fer3.com
-~----------~----~----~----~------~----~------~--~---