Welcome to the NavList Message Boards.

NavList:

A Community Devoted to the Preservation and Practice of Celestial Navigation and Other Methods of Traditional Wayfinding

Compose Your Message

Message:αβγ
Message:abc
Add Images & Files
    Name or NavList Code:
    Email:
       
    Reply
    Re: Lighting Problems w/ Aircraft Bubble Sextants
    From: Gary LaPook
    Date: 2015 Dec 29, 07:14 +0000
    And with the Kollsman sextants, both periscopic and hand held, you can replace the 28 volt bulbs with 6 or 12 v bulbs after you make up a small battery power supply. If you want to keep the 28 volt system then wire three nine volt batteries in series. If you have one with the electronic averager then you need to supply the averager with 28 volts but it eats batteries so better to use a 28 volt lawn sprinkler transformer or a solid state 28 volt supply powered off of your cigarette lighter socket (oops, politically incorrect, no one smokes anymore in California, must be a "12 volt socket") about 25 bucks in components. I have posted information about all of this in the past, just use the search box. 

    gl



    From: Robert Swartz <NoReply_Swartz@navlist.net>
    To: garylapook@pacbell.net
    Sent: Monday, December 28, 2015 10:39 PM
    Subject: [NavList] Lighting Problems w/ Aircraft Bubble Sextants

    All WWII U.S. bubble sextants that have an external battery case and cable plug w/ center pin work as follows:
    Bendix and B&L sextants: Center pin carries +3V potential. Outer ring carries -3V potential from 2 D cells. Instrument frame is  negative (chassis) ground.
    If you have voltage out of your battery case (verified w/ a meter) but no lights--oftentimes you have poor or no ground conductivity
    due to corrosion in the instrument or screws holding parts together. Clean corrosion and voila--lights (of course check bulbs and switch).
    A-10A sextants use a battery case w/4.5V potential from 3 D cells which drive the solenoid of the mechanical averager and have a resistor for 3V lighting.
    A-10 sextants use 2 D cell 3V lighting--Both are frame (chassis) grounded.
    The post WWII Kolllsman series of sextants use 28V aircraft power for lighting and are not supplied w/ battery cases. They are supplied w/power cables that plug and securely screw
    into recepticles on the sextant and aircraft.


       
    Reply
    Browse Files

    Drop Files

    NavList

    What is NavList?

    NavList is a community devoted to the preservation and practice of celestial navigation and other methods of traditional position-finding. We're a group of navigators, navigation enthusiasts and hobbyists, mathematicians and physicists, and historians interested in all aspects of navigation but primarily those techniques which are non-electronic.

    To post a message, if you are already signed up as a NavList member, start a new discussion or reply to any posted message and use your posting code (this is a simple low-security password assigned when you join). You may also join by posting. Your first on-topic messsage automatically makes you a member, and a posting code will be assigned and emailed to you for future posts.

    Uniquely, the NavList message boards also permit full interaction entirely by email. You can optionally receive individual posts or daily digests by email, and any member can post messages by email (bypassing the web site) by sending to our posting address which is "NavList@NavList.net". This functionality is similar to a traditional Internet mailing list: post by email, read by email, reply by email. Most members will prefer the web interface here for posting and replying to messages.

    NavList is more than an online community... more about that another day.

    © Copyright notice: please note that the rights to all messages and posts in this discussion group are held by their respective authors. No messages or text or images extracted from messages may be reproduced without the explicit consent of the message author. Email me, Frank Reed, if you have any questions.

    Join / Get NavList ID Code

    Name:
    (please, no nicknames or handles)
    Email:
    Do you want to receive all group messages by email?
    Yes No

    A NavList ID Code guarantees your identity in NavList posts and allows faster posting of messages.

    Retrieve a NavList ID Code

    Enter the email address associated with your NavList messages. Your NavList code will be emailed to you immediately.
    Email:

    Email Settings

    NavList ID Code:

    Custom Index

    Subject:
    Author:
    Start date: (yyyymm dd)
    End date: (yyyymm dd)

    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site
    Visit this site